Cerca

Flarum tratta la ricerca e il filtraggio come processi paralleli ma distinti. Quale processo viene utilizzato per gestire una richiesta a List API endpoint dipende dai parametri della query:

• Il filtro viene applicato quando il parametro della query filter[q] viene omesso. I filtri rappresentano query strutturate: per esempio, potresti voler recuperare solo le discussioni in una determinata categoria, o gli utenti che si sono registrati prima di una certa data. Filtrando i risultati dei calcoli basati interamente sui parametri filter[KEY] = VALORE query.
• La ricerca viene applicata quando il filter[q] query param è incluso. Le ricerche rappresentano query non strutturate : l'utente invia una stringa arbitraria e i record di dati che "corrispondono" sono restituiti. For instance, you might want to search discussions based on the content of their posts, or users based on their username. Ricerca dei risultati dei calcoli basata esclusivamente sull'analisi del parametro filter[q]: tutti gli altri filter[KEY] = VALUE vengono ignorati durante la ricerca. È importante notare che le ricerche non sono completamente strutturate: il set di dati ricercato può essere vincolato dai gambits (che sono molto simili ai filtri, e li vedremo più avanti).

This distinction is important because searches and filters have very different use cases: filters represent browsing: that is, the user is passively looking through some category of content. In contrast, searches represent, well, searching: the user is actively looking for content based on some criteria.

Flarum implements searching and filtering via per-model Searcher and Filterer classes (discussed in more detail below). Both classes accept a Flarum\Query\QueryCriteria instance (a wrapper around the user and query params), and return a Flarum\Query\QueryResults instance (a wrapper around an Eloquent model collection). This common interface means that adding search/filter support to models is quite easy.

One key advantage of this split is that it allows searching to be implemented via an external service, such as ElasticSearch. For larger communities, this can be significantly more performant and accurate. There isn't a dedicated extender for this yet, so for now, replacing the default Flarum search driver requires overriding the container bindings of Searcher classes. This is a highly advanced use case; if you're interested in doing this, please reach out on our community forums.

Remember that the JSON:API schema is used for all API requests.

Reuse Code

Often, you might want to use the same class as both a Filter and a Gambit (both explained below). Your classes can implement both interface; see Flarum core's UnreadFilterGambit for an example.

Query Builder vs Eloquent Builder

Filters, Gambits, filter mutators, and gambit mutators (all explained below) receive a "state" parameter, which wraps

Filtering

Filtering constrains queries based on Filters (highlighted in code to avoid confusion with the process of filtering), which are classes that implement Flarum\Filter\FilterInterface and run depending on query parameters. After filtering is complete, a set of callbacks called "filter mutators" run for every filter request.

When the filter method on a Filterer class is called, the following process takes place (relevant code):

1. An Eloquent query builder instance for the model is obtained. This is provided by the per-model {MODEL_NAME}Filterer class's getQuery() method.
2. We loop through all filter[KEY] = VALUE query params. For each of these, any Filters registered to the model whose getFilterKey() method matches the query param KEY is applied. Filters can be negated by providing the query param as filter[-KEY] = VALUE. Whether or not a Filter is negated is passed to it as an argument: implementing negation is up to the Filters.
3. Sorting, pagination are applied.
4. Any "filter mutators" are applied. These are callbacks that receive the filter state (a wrapper around the query builder and current user) and filter criteria, and perform some arbitrary changes. All "filter mutators" run on any request.
5. We calculate if there are additional matching model instances beyond the query set we're returning for this request, and return this value along with the actual model data, wrapped in a Flarum\Query\QueryResults object.

Modify Filtering for an Existing Model

Let's say you've added a country column to the User model, and would like to filter users by country. We'll need to define a custom Filter:

<?php

namespace YourPackage\Filter;

use Flarum\Filter\FilterInterface;
use Flarum\Filter\FilterState;

class CountryFilter implements FilterInterface
{
    public function getFilterKey(): string
    {
        return 'country';
    }

    public function filter(FilterState $filterState, string $filterValue, bool $negate)
    {
        $country = trim($filterValue, '"');

        $filterState->getQuery()->where('users.country', $negate ? '!=' : '=', $country);
    }
}

Note that FilterState is a wrapper around the Eloquent builder's underlying Query builder and the current user.

Also, let's pretend that for some reason, we want to omit any users that have a different country from the current user on ANY filter. We can use a "filter mutator" for this:

<?php

namespace YourPackage\Filter;

use Flarum\Filter\FilterState;
use Flarum\Query\QueryCriteria;

class OnlySameCountryFilterMutator
{
    public function __invoke(FilterState $filterState, QueryCriteria $queryCriteria)
    {
        $filterState->getQuery()->where('users.country', $filterState->getActor()->country);
    }
}

Now, all we need to do is register these via the Filter extender:

  // Other extenders
  (new Extend\Filter(UserFilterer::class))
    ->addFilter(CountryFilter::class)
    ->addFilterMutator(OnlySameCountryFilterMutator::class),
  // Other extenders

Add Filtering to a New Model

To filter a model that doesn't support filtering, you'll need to create a subclass of Flarum/Filter/AbstractFilterer for that model. For an example, see core's UserFilterer.

Then, you'll need to use that filterer in your model's List controller. For an example, see core's ListUsersController.

Searching

Searching constrains queries by applying Gambits, which are classes that implement Flarum\Search\GambitInterface, based on the filter[q] query param. After searching is complete, a set of callbacks called "search mutators" run for every search request.

When the search method on a Searcher class is called, the following process takes place (relevant code):

1. An Eloquent query builder instance for the model is obtained. This is provided by the per-model {MODEL_NAME}Searcher class's getQuery() method.
2. The filter[q] param is split by spaces into "tokens". Each token is matched against the model's registered Gambits (each gambit has a match method). For any tokens that match a gambit, that gambit is applied, and the token is removed from the query string. Once all regular Gambits have ran, all remaining unmatched tokens are passed to the model's FullTextGambit, which implements the actual searching logic. For example if searching discussions, in the filter[q] string 'author:1 hello is:hidden' world, author:1 and is:hidden would get matched by core's Author and Hidden gambits, and 'hello world' (the remaining tokens) would be passed to the DiscussionFulltextGambit.
3. Sorting, pagination are applied.
4. Any "search mutators" are applied. These are callbacks that receive the search state (a wrapper around the query builder and current user) and criteria, and perform some arbitrary changes. All "search mutators" run on any request.
5. We calculate if there are additional matching model instances beyond the query set we're returning for this request, and return this value along with the actual model data, wrapped in a Flarum\Query\QueryResults object.

Modify Searching for an Existing Model

Let's reuse the "country" examples we used above, and see how we'd implement the same things for searching:

<?php

namespace YourPackage\Search;

use Flarum\Search\AbstractRegexGambit;
use Flarum\Search\SearchState;

class CountryGambit extends AbstractRegexGambit
{
    public function getGambitPattern(): string
    {
        return 'country:(.+)';
    }

    public function conditions(SearchState $search, array $matches, bool $negate)
    {
        $country = trim($matches[1], '"');

        $search->getQuery()->where('users.country', $negate ? '!=' : '=', $country);
    }
}

No Spaces in Gambit Patterns!

Flarum splits the filter[q] string into tokens by splitting it at spaces. This means that your custom gambits can NOT use spaces as part of their pattern.

AbstractRegexGambit

All a gambit needs to do is implement Flarum\Search\GambitInterface, which receives the search state and a token. It should return if this gambit applies for the given token, and if so, make whatever mutations are necessary to the query builder accessible as $searchState->getQuery().

However, for most gambits, the AbstractRegexGambit abstract class (used above) should be used as a base class. This makes it a lot simpler to match and apply gambits.

Similarly, the search mutator we need is almost identical to the filter mutator from before:

<?php

namespace YourPackage\Search;

use Flarum\Query\QueryCriteria;
use Flarum\Search\SearchState;

class OnlySameCountrySearchMutator
{
    public function __invoke(SearchState $searchState, QueryCriteria $queryCriteria)
    {
        $searchState->getQuery()->where('users.country', $filterState->getActor()->country);
    }
}

We can register these via the SimpleFlarumSearch extender (in the future, the Search extender will be used for registering custom search drivers):

  // Other extenders
  (new Extend\SimpleFlarumSearch(UserSearcher::class))
    ->addGambit(CountryGambit::class)
    ->addSearchMutator(OnlySameCountrySearchMutator::class),
  // Other extenders

Add Searching to a New Model

To support searching for a model, you'll need to create a subclass of Flarum/Search/AbstractSearcher for that model. For an example, see core's UserSearcher.

Then, you'll need to use that searcher in your model's List controller. For an example, see core's ListUsersController.

Every searcher must have a fulltext gambit (the logic that actually does the searching). Otherwise, it won't be booted by Flarum, and you'll get an error. See core's FulltextGambit for users for an example. You can set (or override) the full text gambit for a searcher via the SimpleFlarumSearch extender's setFullTextGambit() method.

Search Drivers

Coming soon!

Frontend Tools

Coming soon!